Canyon 2WD L5-3.7L (2007)
Steering Gear: Service and Repair
Rack and Pinion Gear Rack Bearing Preload Adjustment - Off Vehicle
Rack and Pinion Gear Rack Bearing Preload Adjustment - Off Vehicle
Tools Required
J 45059 Torque Angle Meter
1. Loosen the adjuster plug lock nut (1).
Notice: Refer to Fastener Notice.
2. Tighten the adjuster plug.
For Vehicles With Allen Head Adjuster Plug
Tighten the adjuster plug to 15 N.m (11 lb ft).
^
Use J 45059 to back off the adjuster plug 25 degrees.
For Vehicles With Hex Head Adjuster Plug
Tighten the adjuster plug to 12 N.m (106 lb in).
^
Use J 45059 to back off the adjuster plug 105 degrees.
3. Tighten the adjuster plug lock nut (1) to the steering gear housing.
Hold the adjuster plug stationary while tightening the adjuster plug lock nut (1) to 60 N.m (44 lb ft).