Canyon 2WD L5-3.7L (2007)
7. Remove the lower intermediate shaft to the power steering gear input shaft pinch bolt.
8. Disconnect the lower intermediate shaft from the power steering gear.
9. Remove the lower intermediate shaft from the vehicle.
Installation Procedure
1. Install the lower intermediate shaft to the vehicle.
2. Connect the lower intermediate shaft to the power steering gear.
Notice: Refer to Fastener Notice.
3. Install the lower intermediate shaft to the power steering gear input shaft pinch bolt.
Tighten the lower intermediate shaft the power steering gear input shaft pinch bolt to 45 N.m (33 lb ft).