Canyon 2WD L5-3.7L (2007)
10. Remove the steering column housing assembly (1).
11. Remove the steering shaft assembly.
Installation Procedure
1. Install the steering shaft assembly into the steering column housing.
2. Install the steering column housing assembly (1).
3. Using the tilt lever, position the lock shoes to the dowel pins (2).
4. Rotate the tilt head assembly (1) in order to align the holes for the pivot pins.
5. Install the 2 new pivot pins by performing the following steps:
1. Lubricate the pivot pins (1) with GM P/N 12346293 (Canadian P/N 992723).
2. Press the pivot pins (1) until the pins are firmly seated.
3. Stake the pivot pins at three new locations (1).
