Canyon 2WD L5-3.7L (2007)
11. Remove the TCC solenoid with O-ring seal, and wiring harness assembly from the transmission case.
12. Inspect the TCC solenoid and wiring harness assembly for the following defects:
^
Damage
^
Cracked connectors
^
Exposed wires
^
Loose pins
Installation Procedure
1. Install the wiring harness and TCC solenoid assembly with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.
Notice: Refer to Fastener Notice.