Canyon 2WD L5-3.7L (2007)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
Caution: Refer to SIR Caution.
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
3. Disconnect the automatic transmission shift lock control actuator electrical connector.
4. Put the shift lever clevis into the neutral position.
5. Use a small screwdriver to pry the automatic transmission shift lock control actuator away from the steering column jacket and the cable shift cam
assembly.
6. Remove the automatic transmission shift lock control actuator.
Installation Procedure