Canyon 2WD L5-3.7L (2007)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
1. Disconnect the electrical connectors (2, 4) from the following components:
^
The clutch pedal position switch (1)
^
The cruise control release switch (3)
Important: A new retainer (3) is required after removal.
2. Complete the following in order to disengage the retainer (3) from the clutch pedal pin.
1. Insert a flat-bladed tool (4) between the clutch master cylinder push rod (1) and the clutch pedal (2).
2. Pry the clutch master cylinder push rod (1) away from the clutch pedal assembly (2).
Discard the retainer (3).