gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Sensors and Switches - M/T > < Transmission Input Shaft Seal Replacement|Page 10121
Page 2
background image

1. Using the J 45868 and a hammer, install the NEW rear transmission housing oil seal.
2. Check the transmission fluid level. Add if necessary. Refer to Transmission Fluid Replacement.
3. Install the rear propeller shaft. Refer to Propeller Shaft Replacement - One Piece or - Two Piece.

Sensors and Switches - M/T > < Transmission Input Shaft Seal Replacement|Page 10121