gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Sensors and Switches - Transmission and Drivetrain > < Transmission Mount Replacement (RPO Z71)|Page 10148
Page 2
background image

1. Install the transmission mount to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the mount to transmission bolts. 

Tighten the bolts to 60 N.m (44 lb ft).

3. Lower the transmission and install the two nuts securing the transmission mount to the transmission support.

Tighten the nuts to 57 N.m (42 lb ft).

4. Remove the transmission jack.
5. Lower the vehicle.

Sensors and Switches - Transmission and Drivetrain > < Transmission Mount Replacement (RPO Z71)|Page 10148