Replacing Window Frame on 2007 Canyon 2WD L5-37L: Service and Repair (Page 16405)
7. Fit the backing plate halfway into the sectioning joint, clamp and plug weld to the vehicle.
8. Position the center pillar.
9. Plug weld accordingly.
IMPORTANT: To create a solid weld with minimum heat distortion make 25 mm (1 in) stitch welds along the seam with 25 mm (1 in) gaps
between. Then go back and complete the stitch weld.
10. Stitch the weld sectioning joint.
11. Clean and prepare all welded surfaces.