Canyon 4WD L4-2.9L (2008)
1. Position the lower timing chain guide to the engine.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the lower timing chain guide bolts.
Tighten the bolts to 12 N.m (107 lb in).
3. Install the cylinder head access hole plug.
Tighten the plug to 5 N.m (44 lb in).
4. Install the crankshaft sprocket to the crankshaft sprocket snout.
Align the marked link on the timing chain with the timing mark on the crankshaft sprocket.
5. Install the timing chain tensioner shoe. Refer to Timing Chain Tensioner Shoe Replacement (See: Timing Chain Tensioner/Service and
Repair/Timing Chain Tensioner Shoe Replacement).
