Canyon 4WD L4-2.9L (2008)
Important: Do not use oil base lubricants.
2. Apply a soapy solution to the following in order to ease the installation of the hangers (1):
*
The inner diameter of the exhaust pipe hanger (1)
*
The exhaust pipe hanger rod (3)
3. Press the exhaust pipe hangers (1) over the exhaust pipe hanger rods (3).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the nuts securing the muffler to the catalytic converter.
1. Tighten the muffler nuts by hand until each contacts the metal flange.
2. Tighten the muffler nuts to 45 N.m (33 lb ft).