Canyon 4WD L5-3.5L VIN 6 (2004)
Rear Door Striker: Service and Repair
Striker Replacement Rear Side Access Door - Upper
Striker Replacement Rear Side Access Door - Upper
Removal Procedure
1. Open the rear side access door.
2. Remove the rear side access upper door striker trim cover.
3. Remove the bolts retaining the upper side access door striker to the body.
4. Remove the upper side access door striker from the body.
Installation Procedure
1. Install the upper side access door striker to the body.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts retaining the upper side access door striker to the body.
Tighten the upper side access door striker bolts to 25 N.m (18.14 lb ft).
3. Install the rear side access upper door striker trim cover.
4. Close the rear side access door.