Canyon 4WD L5-3.5L VIN 6 (2004)
Trunk / Liftgate Shock / Support: Service and Repair
LATCH/SUPPORT CABLE ASSEMBLY REPLACEMENT - ENDGATE
REMOVAL PROCEDURE
1. Open and support the endgate.
2. Remove the endgate cover.
3. Disconnect the clips (1) retaining the latch rods (2) to the handle.
4. Remove the latch rods (2) from the retaining clips (1).
5. Remove the support cable (1) from the endgate striker bolt by sliding the cable forward and off the striker bolt head.
