Canyon 4WD L5-3.5L VIN 6 (2004)
4. Remove the heater element (1) by peeling the element off the pad (2).
5. Pull the heater element electrical harness through the hole (3) in the pad.
INSTALLATION PROCEDURE
1. Install the heater element electrical harness through the hole (3) in the pad.
2. Install the adhesive-backed heater element (1) to the pad (2) by pressing in place.
3. Connect the electrical harness to the heater element.
4. Install the front seat cushion cover and pad.
5. Install the front seat assembly in the vehicle.