Canyon 4WD L5-3.5L VIN 6 (2004)
1. Position the water outlet housing to the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the water outlet housing bolts.
^
Tighten the water outlet housing bolts to 10 Nm (89 inch lbs.).
3. Install the power steering pump bracket.
4. Position the J 38185 to the clamp (8) in order to connect the radiator outlet hose (7) to the water outlet housing.
5. Fill the cooling system.
6. Inspect all sealing surfaces leaks after starting the engine.
