Canyon 4WD L5-3.5L VIN 6 (2004)
Radiator Hose: Service and Repair
Inlet
Radiator Hose Replacement - Inlet
^
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the coolant.
2. Using J 38185 reposition the inlet radiator hose clamp away from the thermostat housing (1).
3. Remove the inlet radiator hose from the thermostat.
4. Raise the vehicle.
5. Using J 38185 reposition the inlet radiator hose clamp away from the radiator.
6. Remove the inlet radiator hose (1) from the radiator.
Installation Procedure
