Canyon 4WD L5-3.5L VIN 6 (2004)
2. Install the engine mount bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. To aid in the installation of the bolts, start a bolt in position (1) first.
^
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
4. Lower the engine.
5. Install the engine mount-to-frame bracket through bolt.
^
Tighten both of the engine mount-to-frame bracket bolts to 85 Nm (63 ft. lbs.).
6. Remove the jack stand.
7. Install the engine shield, if equipped. .
8. Install the wheel and tire assembly.
9. Lower the vehicle.
