Canyon 4WD L5-3.5L VIN 6 (2004)
Balance Shaft Chain Guide: Service and Repair
Balance Shaft Chain Guide Replacement
Removal Procedure
1. Remove the balance shaft drive chain.
2. Remove the balance shaft chain guide bolts.
3. Remove the balance shaft chain guide.
Installation Procedure
1. Install the balance shaft chain guide.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the balance shaft chain guide bolts.
^
Tighten the balance shaft chain guide bolts to 10 Nm (89 inch lbs.).
3. Install the balance shaft drive chain.
