Canyon 4WD L5-3.5L VIN 6 (2004)
Balance Shaft Chain Tensioner: Service and Repair
Balance Shaft Chain Tensioner Replacement
Removal Procedure
1. Remove the crankshaft rear oil seal housing.
Important: Every 11-crankshaft rotations, 3 of the 5 dark links on the timing chain will line up with the timing marks.
2. Rotate the crankshaft until the correct timing chain and timing marks align:
^
The left hand balance shaft sprocket timing mark (1) is at the 12:00 position
^
The right hand balance shaft sprocket timing mark (2) is at the 2:30 position
^
The crankshaft sprocket timing mark (3) is at the 4:30 position
^
The 3 timing marks (1-3) on the sprockets line up with a dark link on the chain
3. Remove the balance shaft chain tensioner bolts.
4. Remove the balance shaft chain tensioner.
Installation Procedure
