Canyon 4WD L5-3.5L VIN 6 (2004)
Control Assembly: Service and Repair
HVAC Control Assembly Replacement
HVAC CONTROL ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the accessory trim plate.
2. Remove the screws (7,2) from the HVAC control assembly.
3. Remove the HVAC control assembly from the instrument panel.
4. Disconnect the mode cable from the HVAC control assembly.
5. Disconnect the temperature cable from the HVAC control assembly.
6. Disconnect the HVAC control assembly electrical connectors.
7. Remove the HVAC control assembly.
INSTALLATION PROCEDURE
