Canyon 4WD L5-3.5L VIN 6 (2004)
10. Install the mounting bolts for the brake caliper mounting bracket.
^
Tighten the mounting bolts to 175 Nm (129 ft. lbs.).
11. Position a large screwdriver or pry bar in the cooling fins of the brake rotor and the brake caliper mounting bracket.
Important: The following service procedure is to ensure that the brake rotor is seated properly on the wheel bearing/hub assembly.
12. Tighten the mounting bolts for the brake rotor in sequence.
13. Using a torque wrench, tighten the mounting bolts.
^
Tighten the mounting bolts to 120 Nm (88 ft. lbs.).
