Canyon 4WD L5-3.5L VIN 6 (2004)
Evaporative Emissions Hose: Service and Repair
EVAP Hoses/Pipes Replacement - Fuel Tank
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - FUEL TANK
REMOVAL PROCEDURE
CAUTION:
-
Refer to Fuel and EVAP Pipe Caution in Service Precautions.
-
Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.
1. Remove the fuel tank.
2. Refer to Quick Connect Fitting(s) Service (Plastic Collar) in order to disconnect the evaporative emission (EVAP) pipe (5) from the following:
-
The fuel tank module (2)
-
The vent valve (4)
3. Disengage the EVAP pipe (5) from the retaining features molded into the fuel tank.
INSTALLATION PROCEDURE
1. Secure the EVAP pipe (5) to the retaining features molded into the fuel tank.
2. Refer to Quick Connect Fitting(s) Service (Plastic Collar) in order to connect the EVAP pipe (5) to the following:
-
The fuel tank module (2)
-
The vent valve (4)
3. Install the fuel tank.
