Canyon 4WD L5-3.5L VIN 6 (2004)
-
The camshaft position (CMP) actuator solenoid valve (6)
5. Disconnect the engine wiring harness retainer (2) from the camshaft cover (3).
6. Disconnect the engine wiring harness electrical connectors from the following:
-
The engine coolant temperature (ECT) sensor (1)
-
The fuel injector harness (2)
-
The ignition coils (4)
-
The heated oxygen sensor (HO2S) (5)
7. Disconnect the engine wiring harness electrical connector from the intake camshaft position (CMP) sensor.
8. Carefully disengage the engine wiring harness conduit from the camshaft cover, and position aside.