Canyon 4WD L5-3.5L VIN 6 (2004)
Speed Sensor: Service and Repair
Transfer Case Speed Sensor Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the electrical connector (3) from the transfer case speed sensor (2).
3. Remove the transfer case speed sensor (2) and O-ring seal (1) from the transfer case.
4. Inspect the O-ring seal (1) for wear. Replace if necessary.
Installation Procedure
1. Lightly lubricate the O-ring seal (1).
2. Position the O-ring seal (1) to the speed sensor (2), if removed.
