Canyon 4WD L5-3.5L VIN 6 (2004)
Seat Belt Guide Track: Service and Repair
Shoulder Belt Guide Adjuster Replacement - Front (Extended Cab)
SHOULDER BELT GUIDE ADJUSTER REPLACEMENT - FRONT (EXTENDED CAB)
REMOVAL PROCEDURE
1. Remove the knob (2) from the front seat belt shoulder adjuster (1).
2. Open the front seat belt upper guide shoulder bolt trim cover.
3. Remove the front seat belt upper guide shoulder bolt.
4. Remove the rear side access door upper trim panel (3).
5. Remove the 2 bolts securing the adjuster to the vehicle.
6. Remove the front seat belt shoulder adjuster from the vehicle.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the 2 bolts securing the front seat belt shoulder adjuster (1) to the vehicle.
Tighten
Tighten the front seat belt shoulder adjuster bolts to 52.5 N.m (39 lb ft).
2. Install the rear side access door upper trim panel (3).
3. Install the front seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the front seat belt upper guide bolt to 52.5 N.m (39 lb ft).
