Canyon 4WD L5-3.5L VIN 6 (2004)
4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
5. Remove the left door trim panel.
6. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
7. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
8. Remove the trim panel.
9. Remove the connector positive assurance (CPA) from the seat belt pretensioner-left connector.
10. Disconnect the seat belt pretensioner-left connector from the vehicle harness connector.
11. Remove the garnish molding.
