gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Steering - Revised Steering Gear Replacement Procedure|Page 6098 > < Steering - Revised Steering Gear Replacement Procedure|Page 6096
Page 1
background image

Steering Gear: Description and Operation

Power Steering System Description and Operation 

The hydraulic power steering pump is a constant displacement vane-type pump that provides hydraulic pressure and flow for the power steering gear.
The hydraulic power steering pump is belt-driven.

The power steering fluid reservoir holds the power steering fluid and is integral with the power steering pump. The reservoir can be serviced
separately from the pump.

This vehicle uses a rack and pinion system.

In the rack and pinion system, the rack and the pinion are the 2 components that convert steering wheel rotation to lateral movement. The steering
shaft is attached to the pinion in the steering gear. The pinion rotates with the steering wheel. Gear teeth on the pinion mesh with the gear teeth on the
rack. The rotating pinion moves the rack from side to side. The lateral action of the rack pushes and pulls the tie rods in order to change the direction
of the vehicle's front wheels.

The power steering pressure hose connects the power steering pump fitting to the power steering gear and allows pressurized power steering fluid to
flow from the pump to the gear.

The power steering return hose returns fluid from the power steering gear back to the power steering fluid reservoir. The power steering return line
may contain an integral fin-type or line-type power steering fluid cooler.

In a typical power steering system, a pump generates hydraulic pressure, causing fluid to flow, via the pressure hose, to the steering gear valve
assembly. The steering gear valve assembly regulates the incoming fluid to the right and left chambers in order to assist in right and left turns.

Turning the steering wheel activates the valve assembly, which applies greater fluid pressure and flow to 1 side of the steering gear piston, and lower
pressure and flow to the other side of the piston. The pressure assists the movement of the gear piston. Tie rods transfer this force to the front wheels,
which turn the vehicle right or left.

Steering - Revised Steering Gear Replacement Procedure|Page 6098 > < Steering - Revised Steering Gear Replacement Procedure|Page 6096