Canyon 4WD L5-3.5L VIN 6 (2004)
6. Align the wheel speed sensor wiring harness with the reference mark on the steering knuckle.
7. Install the wheel bearing/hub, into the steering knuckle.
8. Install the wheel bearing/hub, brake rotor mounting bolts.
Tighten
Tighten the mounting bolts to 125 Nm (92 lb ft)
9. Install the brake caliper mounting bracket to the steering knuckle.
10. Position a large screwdriver or pry bar in the cooling fins of the brake rotor and the brake caliper mounting bracket.
11. Tighten the mounting bolts for the brake rotor in sequence.
