Canyon 4WD L5-3.5L VIN 6 (2004)
3. Rotate the clutch master cylinder counter clockwise 1/8 turn until fully seated. The clutch fluid reservoir cap will be vertical at the 12:00 position
when the clutch master cylinder is properly installed.
4. Raise the vehicle.
Important: Ensure the clutch hydraulic hose does not come in contact with any sharp or potentially hot surfaces.
5. Push the clutch hydraulic hose quick connect fitting (2) into the clutch slave cylinder, until a "click" is heard.
6. Tug gently on the clutch hydraulic hose to ensure proper retention into the clutch slave cylinder.
7. Connect the clutch hydraulic hose retainer to the inner fender.
8. Lower the vehicle.
9. Insert a new retainer (3) into the clutch master cylinder push rod (1).
10. Push the clutch master cylinder push rod (1) onto the Clutch pedal pin to secure.
11. Adjust the clutch release switch.
12. Adjust the clutch pedal position switch.
