Canyon 4WD L5-3.5L VIN 6 (2004)
1. Using the J 37212 and a hammer, install the NEW front output shaft seal into the transfer case.
2. Install the yoke flange to the front output shaft.
3. Lightly lubricate the NEW yoke flange O-ring seal with transfer case fluid.
4. Install the yoke flange O-ring seal.
5. Install a NEW yoke flange nut.
Notice: Refer to Fastener Notice in Service Precautions.
6. Attach the J 8614-01 to the yoke flange.
^
Tighten the yoke flange nut to 137 Nm (1101 ft. lbs.).
