Canyon 4WD L5-3.7L (2007)
Notice: Refer to Fastener Notice.
3. Install the screws retaining the antenna base.
Tighten the screws to 7.5 N.m (66 lb in).
4. Install the antenna mast.
5. Remove the mechanics wire from the antenna cable (1).
6. Install the grommet to the hinge pillar.
7. Connect the radio antenna cable (1) to the extension cable.
8. Install the I/P compartment door.
9. Install the right hinge pillar trim panel.
10. Install the right front door sill plate.
