Canyon 4WD L5-3.7L (2007)
6. Clean the mounting surfaces of the body side hinges with a clean rag, and mark the front door hinge locations with a grease pencil, or other
suitable marker.
7. Remove the bolts retaining the body side hinges to the body.
8. Remove the hinges from the body.
Installation Procedure
1. Position the body side front door hinge to the alignment marks.
Notice: Refer to Fastener Notice.
2. Install the bolts retaining the body side door hinge to the body.
Tighten the body side front door bolts to 27 N.m (20 lb ft).
