Canyon 4WD L5-3.7L (2007)
1. Position the carpet in the vehicle.
2. Install the lower body rear corner trim panels. Refer to Body Side Rear Lower Trim Panel Replacement (Crew Cab) Body Side Rear Lower Trim
Panel Replacement (Extended Cab) Body Side Rear Lower Trim Panel Replacement (Regular Cab) .
3. Install the body rear trim panel. Refer to Body Rear Trim Panel Replacement (Crew Cab) Body Rear Trim Panel Replacement (Extended Cab)
Body Rear Trim Panel Replacement (Regular Cab) .
4. Install the lower center pillar trim panels, if equipped. Refer to Center Pillar Lower Trim Panel Replacement .
5. Install the rear door sill plates, if equipped. Refer to Rear Side Door Sill Plate Replacement .
6. Install the left hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side .
7. Install the right hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Right Side .
8. Install the front door sill plates. Refer to Front Side Door Sill Plate Replacement .
9. Install the lower center I/P trim. Refer to Instrument Panel Lower Center Trim Replacement .
10. Install the floor console, if equipped. Refer to Console Replacement (Small W/ Manual Transmission) .
11. For extended and crew cabs, install the jack tools to the floor.
12. Install the jack and tool storage bracket. Refer to Jack and Tool Stowage Container Bracket Replacement (Regular Cab) .
13. Install the storage bins, if equipped. Refer to Storage Compartment Replacement - Rear .
14. Install the rear seats, if equipped. Refer to Seat Replacement - Rear Bench .
15. Install the front seats. Refer to Seat Replacement - Split Bench or Front Seat Replacement - Bucket .
