Canyon 4WD L5-3.7L (2007)
4. Grasp the lower body rear corner trim panel and gently pull the panel (1) away from the body to release the fasteners.
5. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
6. Slide the panel forward so the panel unhooks from around the rear door frame.
7. Remove the lower body rear corner trim panel from the vehicle.
Installation Procedure
1. Position the lower body rear corner trim panel (1) so that the front edge hooks around the rear door frame.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
4. Install the body rear trim panel.
5. Install the rear seat.
6. Install the rear door sill plates.
Body Side Rear Lower Trim Panel Replacement (Extended Cab)
Body Side Rear Lower Trim Panel Replacement (Extended Cab)
Removal Procedure
1. Remove the rear door sill plates.
2. Remove the rear seat back.
3. Remove the rear folding seat.
4. Remove the body rear trim panel.
