Canyon 4WD L5-3.7L (2007)
5. Grasp the lower body rear corner trim panel and gently pull the panel away from the body to release the fasteners.
6. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
7. Slide the panel forward so the panel unhooks from around the door frame.
8. Remove the lower body rear corner trim panel from the vehicle.
Installation Procedure
1. Position the lower body rear corner trim panel so that the front edge hooks around the door frame.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
4. Install the body rear trim panel.
5. Install the rear folding seat.
6. Install the rear seat back.
7. Install the rear door sill plates.
Body Side Rear Lower Trim Panel Replacement (Regular Cab)
Body Side Rear Lower Trim Panel Replacement (Regular Cab)
Removal Procedure
1. Remove the rear door sill plates.
2. Remove the front seat.
3. Remove the body rear trim panel.
