Canyon 4WD L5-3.7L (2007)
4. Grasp the top of the upper center pillar trim panel and gently pull the panel away from the body to release the fasteners.
5. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
6. Remove the upper center pillar trim panel from the vehicle.
Installation Procedure
1. Position the upper center pillar trim panel.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
4. Install the seat belt adjuster knob.
5. Install the upper anchor bolt for the front seat belt.
6. Install the lower center pillar trim panel.
Jack and Tool Stowage Container Bracket Replacement (Regular Cab)
Jack and Tool Stowage Container Bracket Replacement (Regular Cab)
Removal Procedure
1. Remove the jack stowage cover.
