Canyon 4WD L5-3.7L (2007)
3. Remove the lumbar assembly.
4. Remove the 4 seat recliner mounting bolts (1) securing the seat back frame to the seat back recliner mechanism.
5. Remove the seat back frame.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the seat back frame to the seat back recliner mechanism with 4 bolts (1).
Tighten the front seat recliner bolts to 24 N.m (18 lb ft).
2. Install the lumbar assembly.
3. Install the seat back pad and cover.
4. Install the seat in the vehicle.
Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab)
Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab)
Removal Procedure
1. Remove the rear bench seat from the vehicle. Refer to Seat Replacement - Rear Bench .
2. Remove the rear head rest restraints, if equipped. Refer to Rear Seat Head Restraint Replacement .
