Canyon 4WD L5-3.7L (2007)
13. Install the seat switch bezel, if equipped.
14. Install the lumbar knob by pushing the knob straight onto the shaft, if equipped.
15. Install the recliner handle.
16. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.
17. Install the 3 bolts (1) securing the cupholder bracket to the seat frame, if equipped.
Tighten the front seat cupholder bracket bolts to 9.1 N.m (80 lb in).
18. Install the front seat cushion outer trim panel.
