Canyon 4WD L5-3.7L (2007)
1. Using your fingers, tighten the brake pipe to the wheel cylinder by hand.
Notice: Refer to Fastener Notice.
2. Using a backup wrench, tighten the brake pipe fitting.
Tighten the brake pipe fitting to 17 N.m (13 lb ft).
3. Using your fingers, tighten the brake pipe to the wheel cylinder by hand.
4. Tighten the brake pipe fitting.
Tighten the brake pipe fitting to 19 N.m (14 lb in).
5. Install the retaining bolt to the retaining bracket.
Tighten the retaining bracket bolt to 20 N.m (15 lb ft).
