Canyon 4WD L5-3.7L (2007)
4. Observe the markings on the camshaft caps. Each camshaft cap is marked in order to identify its location. The markings have the following
meanings:
*
The arrow should point to the front of the engine
*
The number indicates the position from the front of the engine
*
The "E" indicates the exhaust camshaft.
*
The "I" indicates the intake camshaft.
5. Install the camshaft caps according to the identification marks.
Notice: Refer to Fastener Notice.
6. Install the camshaft cap bolts. Tighten the bolts evenly in order to compress the valve springs before final torque.
Tighten the bolts to 12 N.m (106 lb in).
Important: