Canyon 4WD L5-3.7L (2007)
6. Remove and discard the crankshaft balancer bolt.
7. Install the J 41816-2 into the end of the crankshaft.
Important: Do not pull on outer edge of the crankshaft balancer.
8. Use a 3 jaw puller to remove the crankshaft balancer.
9. Remove the J 41816-2.
10. Remove the crankshaft balancer friction washer.
This will be located at the end of the crankshaft balancer or on the crankshaft.
Installation Procedure
