Canyon 4WD L5-3.7L (2007)
9. Remove the engine mount bolts.
10. Remove the engine mount. You will need to articulate the mount in order to remove the mount.
Installation Procedure
1. Install the engine mount. You will need to articulate the mount in order to install the mount.
2. Install the engine mount bolts.
Notice: Refer to Fastener Notice.
3. To aid in the installation of the bolts, start a bolt in position (1) first.
Tighten the bolts to 50 N.m (37 lb ft).
4. Lower the engine.
