Canyon 4WD L5-3.7L (2007)
10. Install the 4 lower transmission mounting bolts.
Tighten the bolts to 50 N.m (37 lb ft).
11. Install the nuts securing the fuel hose/pipe bracket to the transmission.
Tighten the nuts to 20 N.m (15 lb ft).
12. Install the service slot plug.
13. Install the right front axle.
14. Install the applicable components:
*
RWD
Install the power steering gear.
*
4WD
-
Position the differential carrier assembly to the frame.
-
Install the differential carrier assembly bushing to frame bolts.
Tighten the bolts to 152 N.m (112 lb ft).
15. Install the engine protection shield.
16. Install the oil level indicator and tube.
17. Fill the engine oil.