Canyon 4WD L5-3.7L (2007)
4. Install the balance shaft chain tensioner and bolts.
Tighten the bolts to 10 N.m (89 lb in).
5. Remove the pin holding the tensioner to tighten any slack in the balance shaft drive chain.
6. Verify the correct timing chain and timing mark alignments:
*
The left hand balance shaft sprocket timing mark (1) is at the 12:00 position
*
The right hand balance shaft sprocket timing mark (2) is at the 2:30 position
*
The crankshaft sprocket timing mark (3) is at the 4:30 position
*
The 3 timing marks (1-3) on the sprockets line up with a dark link on the chain
7. Install the crankshaft rear oil seal housing.
