Canyon 4WD L5-3.7L (2007)
*
To aid in aligning the actuator to the camshaft, use a 25 mm (1 in) wrench on the hex of the camshaft to rotate
*
Ensure the alignment pin is properly engaged with the camshaft
Install the exhaust camshaft actuator onto the exhaust camshaft.
9. Install the new exhaust camshaft actuator bolt.
Tighten the bolt to 25 N.m (18 lb ft) plus an additional 135 degrees using the J 45059.
10. Remove the tee in the timing chain tensioner to regain tension on the timing chain.