Canyon 4WD L5-3.7L (2007)
4. Align the oil pump to the crankshaft sprocket splines.
5. Position the engine front cover over the J 44219, and to the engine block.
6. Install the engine front cover bolts.
7. Remove the J 44219 from the engine block.
Notice: Refer to Fastener Notice.
8. Install the 2 remaining engine front cover bolts.
1. Tighten the bolts to 10 N.m (89 lb in).
2. Tighten the small center bolt (1) last to 8 N.m (71 lb in).
9. Install the oil pump pipe and screen assembly.
10. Install the power steering pump.
11. Install the drive belt tensioner.
12. Install the crankshaft balancer.
13. Install the water pump.
