Canyon 4WD L5-3.7L (2007)
Important: Do not use oil base lubricants.
2. Apply a soapy solution to the following in order to ease the installation of the hangers (1):
*
The inner diameter of the exhaust pipe hanger (1)
*
The exhaust pipe hanger rod (3)
3. Press the exhaust pipe hangers (1) over the exhaust pipe hanger rods (3).
Notice: Refer to Fastener Notice.
4. Install the nuts securing the muffler to the catalytic converter.
1. Tighten the muffler nuts by hand until each contacts the metal flange.
2. Tighten the muffler nuts to 45 N.m (33 lb ft).
5. Remove the block of wood (5) from between the frame (4) and rear axle (6).
6. Install the right rear leaf spring bolt (1) and nut (2).
Tighten the leaf spring bolt and nut to 85 N.m (63 lb ft).
7. Install the lower shock absorber bolts (8) and nuts (9).
Tighten the lower shock absorber bolts and nuts to 95 N.m (70 lb ft).
8. Inspect the exhaust system for leaks and underbody contact.
9. Lower the vehicle.
