Canyon 4WD L5-3.7L (2007)
Condenser HVAC: Service and Repair
Condenser Replacement
Tools Required
J39400-A Halogen Leak Detector
Removal Procedure
1. Remove the radiator.
2. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
3. Remove the receiver dryer.
4. Remove the condenser inlet hose bolt.
5. Remove the condenser inlet hose.
6. Remove the condenser outlet hose bolt.
7. Remove the condenser outlet hose.
8. Remove the condenser from mounts on the radiator.
9. Remove the condenser.
Installation Procedure
Important: If replacing the condenser, add the refrigerant oil to the condenser. Refer to Refrigerant System Capacities for the capacity
information.
1. Install the condenser to the radiator.
2. If replacing the condenser, transfer the components from the old condenser as necessary.
3. Install the condenser to the mounts on the radiator.
Notice: Refer to Fastener Notice.
4. Install the condenser retaining bolts to the radiator.
Tighten the bolts to 28 N.m (21 lb ft).
5. Install the receiver dyer.
6. Install the condenser inlet hose.
7. Install the condenser inlet hose bolt.
