Canyon 4WD L5-3.7L (2007)
12. Remove the oil filter.
13. Ensure that the oil filter gasket is still on the old oil filter, if not remove the oil filter gasket from the adapter.
Installation Procedure
1. Apply clean engine oil to the NEW oil filter adapter.
Notice: Refer to Component Fastener Tightening Notice.
2. Install the NEW oil filter.
Tighten the oil filter to 30 N.m (22 lb ft).
3. Wipe any excess oil from the oil filter drain deflector.
4. Tighten the oil pan drain plug.
Tighten the plug to 26 N.m (19 lb ft).
