Canyon 4WD L5-3.7L (2007)
Notice: Refer to Component Fastener Tightening Notice.
1. Install the VSS with O-ring seal.
Tighten the vehicle speed sensor (VSS) to 17 N.m (13 lb ft).
2. Connect the VSS electrical connector (2).
3. Lower the vehicle.
Notice: Refer to Component Fastener Tightening Notice.
1. Install the VSS with O-ring seal.
Tighten the vehicle speed sensor (VSS) to 17 N.m (13 lb ft).
2. Connect the VSS electrical connector (2).
3. Lower the vehicle.